Dell XPS 13 (9333, Late 2013) - Manual (Page 56)

56 | System Setup
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
• Removable Drive — The computer attempts to boot from the removable drive. If no
operating system is on the drive, the computer generates an error message.
• Hard Drive — The computer attempts to boot from the primary hard drive. If no
operating system is on the drive, the computer generates an error message.
• USB Storage Device — Insert the memory device into a USB port and restart the
computer. When
F12 Boot Options appears in the lower-right corner of the
screen, press <F12>. The BIOS detects the device and adds the USB flash option to
the boot menu.
NOTE: To boot to a USB device, the device must be bootable. To ensure that
your device is bootable, check the device documentation.
• CD/DVD/CD-RW Drive — The computer attempts to boot from the optical drive. If
no disc is in the drive, or if the disc is not bootable, the computer generates an error
message.
Secure Boot Allows you to enable or disable secure
boot.
Load Legacy Option Rom Allows you to enable or disable the option
to load a legacy rom
Boot List Option Allows you to set the boot sequence
order- UEFI or Legacy.
Exit
Exit Saving Changes Allows you to save the changes made and
exit the BIOS.
Exit discarding Changes Allows you to discard the changes made
and exit the BIOS.
Load Setup Defaults Allows you to load the default BIOS
settings.
Discard Changes Discards the changes made to the BIOS.
Save Changes Saves the changes made to the BIOS.
Boot (Continued)