Dell Dimension 2300 - Manual (Page 40)

Peripheral Configuration Submenu
IDE Configuration Submenu
Option Function
USB Controller Sets the USB controller to either Enabled (default) or Disabled.
Legacy USB Support Set to Disabled if legacy USB support is not desired. Enabled (default) allows support for legacy USB.
Integrated Audio Sets the integrated audio controller to either Enabled (default) or Disabled.
Serial Port Sets the integrated serial port setting to Auto, (default) 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3, 3F8/IRQ4, or Disabled.
Parallel Port Sets the integrated parallel port setting to Auto, (default) 3BC/IRQ7, 278/IRQ5, 378/IRQ7, or Disabled.
Parallel Port Mode Sets the integrated parallel port mode to Bi-directional (default), Output Only, ECP, or EPP.
ECP Mode Use DMA If the Parallel Port Mode option is set to ECP, this setting selects the ECP DMA mode. The options are 3 (default) and 1.
Option Function
Primary IDE
Controller Configures the integrated primary IDE controller as either Enabled (default) or Disabled.
Secondary IDE
Controller Configures the integrated secondary IDE controller as either Enabled (default) or Disabled.
IDE Primary Master Identifies the first drive attached to the primary IDE interface, usually the boot hard drive. See " IDE Primary Master Submenu ."
IDE Primary Slave Identifies the second drive attached to the primary IDE interface, usually a second hard drive. The format of this submenu is the same
as the one described in "
IDE Primary Master Submenu ."
IDE Secondary
Master Identifies the first drive attached to the secondary IDE interface, if there is one. The format of this submenu is the same as the one
described in "
IDE Primary Master Submenu ."
IDE Secondary Slave Identifies the first drive attached to the secondary IDE interface, if there is one. The format of this submenu is the same as the one
described in " IDE Primary Master Submenu ."