Dell Dimension 2300 - Manual (Page 43)

Boot Screen
Option Function
ACPI Suspend Type Determines the ACPI suspend type. Options are S3 (default) and S1.
Wake-Up by PCI Device Allows a PCI device to wake up the computer. The options are Enabled (default) and Disabled.
AC Power Recovery Determines what state the computer enters when AC power is restored after a power loss. Settings are as follows:
l Last State
Computer returns to the state it was in when power was lost.
l Off (default)
Computer stays off when power is restored; you must press the power button to turn on the computer.
l On
Computer turns on when power is restored.
Option Function
Quiet Boot Enabled (default) displays the DELL logo during POST. Disabled displays the normal POST messages.
Quick Boot When set to Enabled, this option shortens POST by eliminating some tests. If set to Disabled (default), all POST
tests occur.
1st Boot Device through 4th Boot
Device Sets the boot device sequence. Only the bootable devices that are connected to the computer are listed as options.
Hard Disk Boot Priority Sets the hard drive boot priority. Options are Pri.M (device name) (default) and Bootable Add-in Cards.