Dell E198WFP Monitor - Manual (Page 20)

Select Blue Preset for a bluish tint. This color setting is used for text based applications (spreadsheets, programming, text
editors, etc.).
Select Red Preset for a reddish tint.This color setting is used for color-intensive applications (photograph image editing,
multimedia, movies, etc.).
Select Normal Preset for default color settings. This setting is also the “sRGB” standard default color space.
User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single
digit increments, from 0 to 100.
Advanced
Settings
Input Color
Format
Choose the RGB option if monitor is connected to a PC or a DVD using a VGA or a DVI cable. Choose the YPbPr+ option if monitor is
connected to a DVD by a YPbPr cable.
OSD
Settings
Horizontal
Position
Vertical
Position
OSD Hold
Adjust the settings for the OSD, including the location, the amount of time the menu remains on the screen, and the rotation of the
OSD.
Position of the OSD:
To adjust the horizontal position of the OSD, use the - and + buttons, and move OSD to the left and right.
To adjust the vertical position of the OSD, use the - and + buttons, and move OSD down and up.
OSD Hold Time:
The OSD stays active for as long as it is in use. Adjusting the hold time, sets the length of time the OSD remains active after the last
time you pressed a button. Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.