Dell E198WFP Monitor - Manual (Page 7)

Electrical
The following table lists the monitor electrical features:
Video input signals
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on
green)
AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)
Inrush current
120V:30A (Max.)
240V:60A (Max.)
Physical Characteristics
The following table lists the monitor physical characteristics:
Connector type 15-pin D-subminiature, blue connector; DVI-D, white connector
Signal cable type
Digital: Detachable, DVI-D, Solid pins, shipped detached from the monitor
Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor
Dimensions (with stand)
Height
14.38 inches (364.85 mm)
Width 17.54 inches (445.09 mm)
Depth 5.67 inches (143.90 mm)
Dimensions: (without stand)
Height
11.46 inches (291.19 mm)
Width 17.54 inches (445.09 mm)
Depth 2.32 inches (59.00 mm)
Stand dimensions:
Height
11.40 inches (289.25 mm)
Width 11.52 inches (292.50 mm)
Depth 5.67 inches (143.90 mm)
Weight with packaging 14.26 lbs (6.47 kg)
Weight with stand assembly and
cables
10.58 lbs (4.8 kg)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
8.16 lbs (3.7 kg)
Weight of stand assembly 2.14 lbs (0.97 kg)
Environmental
The following table lists the environmental condition for monitor:
Temperature
Operating
5° to 35°C (41° to 95°F)
Nonoperating
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
Humidity
Operating
10% to 80% (noncondensing)
Nonoperating
Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90%(noncondensing)
Altitude
Operating 3,657.6m (12,000 ft) max
Nonoperating 12,192 m (40,000 ft) max
Thermal dissipation
256.08 BTU/hour (maximum)
119.5 BTU/hour (typical)
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that
appears as an extremely tiny dark or bright discolored spot.
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within
competitive standards. For more information, see Dell Support site at: support.dell.com.