Dell Workgroup Laser Printer S2500/S2500n - Manual (Page 35)

L o a d p a p e r 3 5
6 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the print media. Straighten the edges of the stack on a level
surface.
NOTE: When you load the tray, do not exceed the maximum stack height indicated by the stack
height indicator. Overfilling the tray may cause jams.
7 Place the print media against the left side of the tray, with the print side down and
facing the front of the tray.
Do not load bent or wrinkled print media.
8 Tuck the corner of the print media under the metal stop.
Metal stop
Stack
height
indicator