Dell Workgroup Laser Printer S2500/S2500n - Manual (Page 92)

9 2 Ve r i f y p r i n t e r s e t u p
w
w
w
.
d
e
ll.
co
m/
su
p
p
l
i
e
s |
su
p
p
o
r
t
.
d
e
l
l.c
o
m
Restoring factory defaults
You can make changes to printer settings or values by using the menus available through the
Printer Settings Configuration sheet, PJL commands, or the Local Printer Setup Utility. For
more information, see “Understanding the printer menus” in your User’s Guide for more
information.
Recommended method
Restore factory defaults through the Reset Factory Defaults menu item in the Utilities
Menu. See “Understanding the printer menus” in your User’s Guide for more information.
Alternate method
To restore the original printer settings (factory default settings):
1 Print a Printer Settings Configuration sheet. See “Understanding the printer menus”
in your User’s Guide for more information.
2 Turn off the printer.
3 Open the Top-Front cover on the printer.
4 Hold down the Continue and the Cancel buttons simultaneously while powering on
the printer. The LEDs on the printer will cycle.
5 Once the Error LED is on and the lights do not cycle, release the Continue and
Cancel buttons.
6 Close the Top-Front cover on the printer.
The printer factory defaults are restored.
To return to the Home menu, press and hold Cancel until all of the lights cycle. To exit the
menus, turn the printer off.