Camera, Removing the camera, Replacing the camera – Dell Vostro A90 (Late 2008) User Manual
Page 9
Back to Contents Page
Camera
Dell™ Vostro™ A90 Service Manual
Removing the Camera
1.
Follow the instructions in
Before You Begin
.
2.
Remove the module cover (see
Removing the Module Cover
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the palm rest (see
Removing the Palm Rest
).
5.
Remove the display assembly (see
Removing the Display Assembly
).
6.
Remove the display bezel (see
Removing the Display Bezel
).
7.
Disconnect the camera cable from the connector.
8.
Remove the camera board.
Replacing the Camera
1.
Align the camera board over the slot holes and gently replace it.
2.
Reconnect the camera cable to the connector.
3.
Replace the display bezel (see
Replacing the Display Bezel
).
4.
Replace the display assembly (see
Replacing the Display Assembly
).
5.
Replace the palm rest (see
Replacing the Palm Rest
).
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Replace the module cover (see
Replacing the Module Cover
).
8.
Slide the battery into the battery bay, until it clicks into place and slide the battery-lock latch towards the lock position.
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface
(such as a connector on the back of the computer).
1
camera
2
camera cable connector