Dell Dimension C521 - Manual (Page 100)

100
Appendix
Video
Primary Video
( Auto default)
This setting specifies which video controller is primary when there is two video
controllers availble (PCI, Onboard, Auto, and PEG). This selection only matters when
if there are two video controllers present. When Auto is selected, the add-in video
controller will be used.
NOTE:
A PCI Express graphics card will override the integrated video controller.
Video Memory Size
( 64MB default)
This setting configures the amount of system memory that is reserved for the
integrated video controller. The settings are Auto, 16MB, 32MB, 64MB, 128MB, or
Off.
Performance
HDD Acoustic Mode
( Bypass default)
• Bypass — Your computer does not test or change the current acoustics mode setting.
• Quiet — The hard drive operates at its most quiet setting.
• Suggested — The hard drive operates at the level suggested by the drive manufacturer.
• Performance — The hard drive operates at its maximum speed.
NOTE:
Switching to performance mode may cause the drive to be noisier, but its
performance is not affected. Changing the acoustics setting does not alter your hard-drive
image.
Security
Unlock Setup When an administrator password is being used, allows the user access to modify
system setup settings. Enter the administrator password at the prompt to unlock
system setup. If the correct password is not entered here, the user can view but not
modify system setup fields.
Admin Password
( Not Set default)
Displays the current status of your system setup program’s password security feature
and allows you to verify and assign a new admin password.
System Password
( Not Set default)
Displays the current status of the system's password security feature and allows a new
system password to be assigned and verified.
Password Changes
( Unlocked default)
Determines the interaction between the System password and the Admin password.
Locked prevents a user without a valid Admin password from being able to modify the
System password. Unlocked allows a user with a valid System password to modify the
system password.
Non-Execute Func
( On default)
Enables or disables Execute Disable memory protection technology.