Cd/dvd drive – Dell Dimension C521 User Manual

Page 86

Advertising
background image

86

Removing and Installing Parts

6 Locate the correct guidance-slot for the Media Card Reader (slot 2) and align the shoulder screws with

the screw guides.

7 Slide the Media Card Reader into the bay until it clicks into place.
8 Connect the power and data cables to the back of the Media Card Reader.
9 Connect the data cable to the USB connector on the system board (see "System Board Components"

on page 63).

10 Replace the computer cover (see "Replacing the Computer Cover" on page 90).

NOTICE:

To connect a network cable, first plug the cable into the network port or device, and then plug it into the

computer.

11 Connect your computer and devices to electrical outlets, and then turn them on.

CD/DVD Drive

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the

Product Information Guide.

CAUTION:

To guard against electrical shock, always unplug your computer from the electrical outlet before

removing the cover.

1

Media Card Reader

2

slot verification number

1

2

Advertising