Before you begin, Installing drivers in windows 98 se/me, Testing the installation in windows 98 se/ me – CREATIVE Blaster Modem User Manual
Page 25: Testing the installation in windows 98 se/me
Installing Software 3-2
Before You Begin
After connecting your modem, if you see the Add New Hardware Wizard dialogue box, click the Cancel
button. Proceed with the driver installation for your OS.
Installing Drivers
in Windows 98
SE/Me
1.
Insert the Installation CD into the CD-ROM drive.
2.
Click Start -> Run.
3.
When a dialogue box similar to Figure 3-1 appears,
click the Browse button and locate the UIUSetup.exe
in E:\Drivers\Win98Se (where E: is your CD-ROM
drive).
For Windows Me, locate the UIUSetup.exe file in
E:\Drivers\WinMe.
4.
Click the OK button.
5.
Restart your computer.
Testing the
Installation in
Windows 98 SE/
Me
1.
Click Start -> Settings -> Control Panel.
2.
In the Control Panel window, double-click the Modems icon.
3.
In the Modem Properties dialogue box, click the Diagnostics tab.
4.
On the Diagnostics tabbed page, select the COM port that has been assigned to your modem.
Figure 3-1