CREATIVE Blaster Modem - Manual (Page 28)

Installing Software 3-5
Installing Drivers
in Windows XP 1. When the Found New Hardware wizard
(Figure 3-5) appears click Cancel.
2. Insert the Installation CD into the CD-ROM drive.
3. Click Start -> Run.
4. When a dialogue box similar to Figure 3-6 appears,
click the Browse button and locate the file
UIUSetup.exe in E:\Drivers\WinXP (where E: is
your CD-ROM drive).
5. Click the OK button.
6. Restart you computer when software installation is
complete.
Figure 3-5
After you have set up your
modem, run a test to ensure that
your modem has been installed
properly (see “Testing the
Installation in Windows XP” on
page 3-6).
Figure 3-6