Isdnbri provisioning by switch type, Isdn bri provisioning by switch type – Cisco 1700 User Manual

Page 79

Advertising
background image

D-3

Cisco 1700 Router Hardware Installation Guide

78-5405-03

Appendix D Ordering and Configuring an ISDN Line

ISDN BRI Provisioning by Switch Type

The ISDN BRI line is configured (provisioned) for different types of services by
the ISDN BRI service provider. The person ordering the ISDN line must also
order the provisioning described in this section.

Table D-2

lists the provisioning that should be ordered for the router, based on the

switch type.

Table D-2

ISDN Provisioning by Switch Type

Switch Type

Provisioning

5ESS Custom BRI

For data only

2 B channels for data
Point to point
Terminal type = E
1 directory number (DN) assigned by service provider
MTERM = 1
Request delivery of calling line ID on Centrex lines
Set speed for ISDN calls to 56 kbps outside local exchange

5ESS Custom BRI

For voice and data

(Use these values only if you have an ISDN telephone connected.)
2 B channels for voice or data
Multipoint
Terminal type = D
2 directory numbers assigned by service provider
2 service profile identifiers (SPIDs) required, assigned by service
provider
MTERM = 2
Number of call appearances = 1
Display = No
Ringing/idle call appearances = idle
Autohold= no
Onetouch = no
Request delivery of calling line ID on Centrex lines
Set speed for ISDN calls to 56 kbps outside local exchange
Directory number 1 can hunt to directory number 2

Advertising