Cortelco CALLER ID TYPE II 2700 User Manual
Page 12
12
T
ELEPHONE
F
EATURES
DIALING
The 2700 is only capable of DTMF dialing. It is not capable of pulse
dialing.
RECEIVING A PHONE CALL
1.
When the phone rings, lift the handset or press SPEAKER to begin
your conversation.
2.
To change the Ringer Volume, refer to the “Factory Presets”
section.
PLACING A PHONE CALL
1.
Lift the handset or press the SPEAKER button and wait for a dial
tone.
2.
Dial the telephone number you wish to call. The number will
appear on the display window.
PREDIAL
1.
While the handset is on hook, enter the desired telephone number
using the key pad. The number will appear in the display. To
delete a digit or the entire number, press REVIEW DOWN.
2.
To dial the displayed number, lift the handset, press SPEAKER or
DIAL.
SPEAKER BUTTON
NOTE: Power Adapter must be used to ensure proper function
1.
Receiving Incoming Calls
a.
When the phone rings, press and release SPEAKER and speak
normally into the built-in microphone from a distance of 5-6 inches.
b.
You can adjust the volume of the caller’s voice by by pressing the
VolumeButton on the base of the telephone.
c.
After the conversation has finished, press and release SPEAKER to
hang up.
2.
Making A Call
a.
Press and release SPEAKER.
b.
When you hear a dial tone, dial the number or press the auto memory
button. The number will appear on the display window.
c.
When your party answers, adjust the volume of the conversation by
pressing the Volume Button on the base of the telephone.
d.
After the conversation has finished, press and release SPEAKER to
hang up.
Note:
1.
If you wish to switch from speakerphone to handset, simply lift the handset.
2.
If you wish to switch from handset to speakerphone, press and release
SPEAKER and then hang up the handset.