Id f – Cortelco CALLER ID TYPE II 2700 User Manual
Page 16
16
C
ALLER
ID F
EATURES
CALL WAITING DISPLAY
Call-waiting service alerts you to a new call by playing a tone while
you are on a call. Call Waiting Caller ID not only tells you there is
another call waiting, but lets you know who the caller is before the call
is answered. The name and number of the incoming call will be shown
on the unit’s display. This infomation will remain displayed for 16
seconds. In addition to this, the CALL WAITING symbol (CW) will
flash.
RECEIVING CALLS
1.
When the telephone is not in use and a new call is received, the
display will show the NEW symbol, the phone number, the caller’s
name, and the call time for 20 seconds. The REPEAT symbol will
appear if the call has come in more than once.
2.
After 20 seconds with no activity, the display will default to the
Stand-By screen until another call is received or a button is
pressed.
REVIEWING CALLS
1.
When in Standby Mode, press REVIEW UP or REVIEW DOWN to
see the stored calls. This unit stores up to 99 calls.
2.
The NEW symbol will be removed from each call after it is re-
viewed.
3.
The reviewed number can be stored into any of the auto memory
buttons:
a.
With the number displayed, press SAVE.
b.
[SAVE TO ?] will appear. Press M1-M5 or SHIFT M1-M5. Press
SAVE again.
c.
The caller’s name will appear. Press SAVE again.
d.
[SET VIP RING] will appear. Use REVIEW UP and REVIEW DOWN
to select the desired ring cadence. Press SAVE again.
4.
When the end of the call records is reached, the display will show
[-END OF LIST- ].
This unit may not be activated or deactivated under certain conditions. For ex-
ample, when you retrieve messages from an outside phone (not your own tele-
phone number), the MESSAGE indicator may not be canceled when you return
home. If you experience this situation, pick up the handset and hang up. The MES-
SAGE indicator will cancel.