Sony CDP-CX57 - Manual (Page 18)

Playing CDs
Playing all tracks on a specified disc in
random order
1
Press PLAY MODE repeatedly until "1 DISC" and
"SHUFFLE" appear in the display.
When using the remote, press SHUFFLE twice.
2
Turn the JOG dial until the disc number you want
appears in the display.
When using the remote, press DISC first and then
press the number button of the disc.
3 Push the JOG dial or press C>.
When using the remote, press ENTER.
1 DISC Shuffle Play starts.
" T’ " appears in the display while the player is
"shuffling" the tracks.
To cancel Shuffle Play
Press PLAY MODE repeatedly until "SHUFFLE" disappears
from the display. When using the remote, press CONTINUE.
'Q' You can start Shuffle Play while playing
Press PLAY MODE repeatedly until "SFTUFFLE" appears
in the display. When using the remote, press SHUFFLE.
Shuffle Play starts from the current track.
You can directly select a disc for 1 DISC Shuffle Play [J]
See "Selecting a disc directly using the remote" on page
14.
'Q'
You can go to the next disc during 1 DISC Shuffle Play [J]
Press DISC SKIP +.
'O' You can specify the next disc to play during 1 DISC
Shuffle Play
Turn the JOG dial to specify the next disc. After all the
tracks on the current disc are played in random order,
the next disc starts playing. If you want to skip to the
next disc right away, push the JOG dial while playing the
current disc.
Notes
• You cannot specify the next disc to play during ALL DISCS
Shuffle Play.
• Even if you press ■ or turn off the player during ALL
DISCS Shuffle Play, the player remembers which discs/
tracks were played and which were not. Therefore, if you
want to start ALL DISCS Shuffle Plav again from the
beginning, be sure to repeat the procedure from Step 1.
Creating Your Own Program
(Program Play)
You can arrange the order of the tracks and/or discs to
create your own program and the program is stored
automatically. A program can contain up to 32 "steps"
— one "step" may contain a track or a whole disc.
You can make a program using the controls on the
remote as well as ones on the player. However, the
programming procedures are different.
Creating a program on the player
PLAY MODE JOG CHECK
[> KM/WX CLEAR
1
Press PLAY MODE repeatedly until "PROGRAM"
appears in the display.
If a program is already stored, the last step of the
program appears in the display. When you want to
erase the whole program, hold down CLEAR until
"CLEAR" appears in the display (see page 19).
2 Turn the JOG dial imtil the disc number you want
appears in the display.
2 0
: ) k D i s c - 2 0 ) k :
3
To program a whole disc, skip this step. Press
IXl<]/>t>ll until the track number you want
appears in the display.
2 0
4
2 0
✓
I
V
Track number
(Continued)
17