Sony CDP-CX57 - Manual (Page 6)

Getting Started
Connecting Another CD Player
If you have a Sony CD player equipped with the
CONTROL A1 jack and the command mode of that
player can be set to CD 3, you qan control that player as
the second player with this unit. After cormecting this
unit and an amplifier, follow the procedure below.
Be sure to turn off the power of each player before
making this cormection.
To LINE OUT COMMAND
What cords will I need?
• Audio cord (1) (Use the cord supplied with the player to be
connected.)
• Monaural (2P) mini-plug cord (1) (not supplied)
1 Connect the players with an audio cord (see also
"Hookups" on page 5).
CDP-CX200, etc.
2 Connect the players with a monaural (2P) mini­
plug cord.
CDP-CX57
CDP-CX200, etc.
For details on this connection, refer to the
supplementary "S-Link™/CONTROL-A1 Control
System" instructions.
Set the COMMAND MODE selector of each
player.
Set the COMMAND MODE selector of this player
to CD 1 or CD 2, and set that of the second player
toCD3.
COMMAND
MODE
fli5
For details on how to operate the second player,
see "Controlling Another CD Player" on page 20
and "Playing Alternately" on page 22.
4 Connect the AC power cord of both players to AC
outlets.
Notes
• Do not connect a player other than that you use as the
second player to the 2ND CD IN jacks of this player.
• When connecting a second CD player, do not connect the
DIGITAL OUT (OPTICAL) connector of this unit to the
amplifier.