Step 2: setting up your speakers, Step, Setting up your speakers – Sony MHC-RXD6AV User Manual
Page 5: Positioning the speakers
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I
Inserting two R03 (size AAA)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Step 2: Setting up
your speakers
Connecting the supplied rear and center
surround speakers enables you to fully enjoy
Dolby Pro Logic Surround sound. Dolby Pro
Logic Surround is a decoding system
standardized in TV programs and movies.
Dolby Pro Logic Surroimd improves the
sound image by using four separate channels.
These chaimels manipulate the sound to be
heard and enhance the action as it happens
on the screen.
Positioning the speakers
Before you connect them, determine the best
location for your speakers.
1
Place the front speakers at an angle
of 45 degrees from your listening
position.
Center
Front
surround Front
speaker (L)
speaker
speaker (R)
Miij
Rear surround
speaker (L)
Rear surround
speaker(R)
continued