Selecting an output signal (input/ output), 3 select monitor out, edit out or tv out, Using the input/ output menu – Sony KP-61XBR48 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the INPUT/
OUTPUT menu
Selecting an output signal (INPUT/
OUTPUT)
You can select an output signal from the SELECT OUT
jacks at the rear of the projection TV.
•MENU
-Joystick
Z
Press the joystick up or down to select
INPUT/OUTPUT and click thè joystick.
VIDEO LABEL D D
] Use (+1 RETURN© Exit
3
Select MONITOR OUT, EDIT OUT or TV OUT.
Select
To
MONITOR OUT Output the signal of the picture
displayed on the projection TV screen.
Use this option to edit tapes while
monitoring.
EDIT OUT
Output the signal input to the
projection TV regardless of the
displayed picture on the screen.
Use this option to edit tapes while
watching an input image different
from that being recorder"!.
TV OUT
Output the TV signal.
Use this option when you connect an
AV receiver to the VIDEO 1 IN jacks.
To select MONITOR OUT:
(1) Make sure the cursor is beside MONITOR OUT
and click the joystick.
(2) Press TV/VIDEO to select the input to the
projection TV and click the joystick.
TVA/IDEO
yj
IP]
VIDEO 2 OUT
jyOJT ^
^
VCR ----- --------
D :
!£!Lin VIDEO LABEL □ 10
ij Use i RETURN© Exit (VFtj]
To select EDIT OUT:
(1) Press the joystick up or down to select EDIT
OUT and click the joystick.
(2) Press the joystick up or down to select the input
to be edited and click the joystick.
To select TV OUT:
(1) Press the joystick up or dov/n to select TV OUT
and click the joystick.
"Set up using only VIDEOl input?" appears.
OUT
tl
Set up using
only
VIDEOl
input?
BJYES
[%NO
Use (*) RETURN© Exit®
(2) If you connect only an AV receiver to your
projection TV, press the joystick up or down to
select YES. Then click the joystick. You can
always select the signal from the receiver by
pressing TV /VIDEO once.
If you connect your audio/video equipment to
the projection TV, select NO. You can select any
of the VIDEO 1 to VIDEO 5 inputs with the TV/
VIDEO button.
Notes
• When you set INPUT/OUTPUT to TV OUT, you cannot swap
the main/right and window/left pictures.
• The SELECT OUT signal is only available when the projection
TV is on.
30
■EN
Operations