Sony KP-61XBR48 - Manual (Page 6)

step 2:
Connections
Connecting an antenna/cable TV
system without a VCR
To cable or antenna
Cable
(Rear of projection TV)
VHF/UHF
Although you can use either an indoor antenna or
outdoor antenna with your projection TV, we
recommend connecting to an outdoor antenna or a
cable TV system for improved picture quality.
For the customers who connect a cable box, skip "Step
4: Setting up the projection TV automatically (AUTO
SET UP)" (page 14) and proceed to "Selecting the cable
box output channel (TV INPUT)" (page 18).
To cable box
If your cable company requires you to connect a cable
box, make the connection as follows:
(Rear of projection TV)
Cable
IN OUT
Cable box
VHF/UHF
Connecting an antenna
Connect your anterma cable to the VHF/UHF anterma
terminal. If you cannot connect your antenna cable
directly to the terminal, follow one of the instructions
below depending on your cable type.
. VHF only
or
■ VHF/UHF
or
' Cable
75-ohm coaxial cable
(Rear of projection TV)
VHF/UHF
To cable box and cable
--------------------------------------<
Cable box
' ' ' <
75-ohm coaxial cable
(not supplied)
(Rear of projection TV)
AUX
VHF/UHF
CATV cable
B
.VHF only
or
> UHFonly
or
.VHF/UHF
(Rear of projection TV)
300-ohm twin lead cable ___________ VHF/UHF
""■1 -
Antenna connector
Some cable TV systems use scrambled or encoded
signals requiring a cable box* in addition to the normal
cable connection.
* The cable box will be supplied by the cable company.
> VHF
and
. UHF
75-ohm coaxial cable
(Rear of projection TV)
VHF/UHF
EAC-66 U/V mixer
(not supplied)
300-ohm twin lead cable
Notes
• Most VHF/UHF combination antennas have a signal splitter.
Remove the splitter before attaching the appropriate
connector.
• For better picture quality, connect an anterma by using a 75-
ohm coaxial cable.
To cable and antenna
CATV cable
Antenna cable
(Rear of projection TV)
AUX
VHF/UHF
:-EN Getting Started