Inserting^an add-in board, To insert an add-in board, Inserting an add-in board – Sony PCV-90 User Manual
Page 100
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting an Add-in Board
Inserting^an Add-in Board
You can add ISA or PCI boards to the system. After removing the side
and rear panels and the I/O bracket, identify the connector where you
want to insert the add-in board.
Caution
Make sure you observe the proper safety precautions when you add boards to your
Sony PC. See "Notes on Use" on page 109.
To insert an add-in board
1
Shut down your PC, turn off all peripheral devices, such as your
printer, display, and speakers, and then unplug your PC.
2
Remove the side and rear panels and the I/O bracket as described
on page 90.
3
Remove the slot cover for the slot you have chosen.
93