Sony MDS-JE330 - Manual (Page 23)

Locating a Particular Point
in a Track
You can locate a particular point in a track during play or
play pause.
C23 ooo
0^0 Is Sto e
ECU •
03
O r
Locating a point whiie monitoring the
sound
Press down during play.
You will hear intermittent playback as the disc goes
forward or reverse. When you reach the point, release the
button.
Notes
• If the disc reaches the end while you're pressing the deck
stops.
• Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed.
Locating a point by observing the time
indication
Playing Tracks Repeatedly
You can play an entire MD repeatedly. This function can
be used with Shuffle Play to repeat all the tracks in
random order (page 24), or with Program Play to repeat
all the tracks in the program (page 25). You can also
repeat a specific track or portion within a track.
REPEAT
CHI o 9
■ L_
® O
ooo
ooo
ooo
ooo
O O O
O O O
oQo
ooo
3 G D
REPEAT ■
Note
If you turn off the deck or disconnect the power cord, the deck
will store the last setting of the repeat play ("Repeat All” or
"Repeat 1") and recall it the next time you turn on the deck.
0)
s'
to
s
D
Press down during play pause.
The elapsed playing time of the track appears in the
display. When you reach the point, release the button.
No sound is output during this time.
Q When Over appears in the display
The disc has reached the end while you're pressing ► ► . Turn
AMS counterclockwise (or press ) or press to go back.
Repeating all the tracks on the MD
(Repeat All Play)
Press REPEAT repeatedly until "Repeat All" appears in
the display.
When you play an MD, the deck repeats the tracks as
follows:
When the play mode is The deck repeats
Normal play (page 21) All the tracks in sequence
Shuffle Play (page 24) All the.tracks in random order
Program Play (page 25) All the tracks in the program in
sequence
To stop Repeat All Play
Press ■ .
To resume normal play
Press REPEAT repeatedly until "Repeat Off" appears in
the display.
23