Enjoying surround sound, Press power on the operation panel, Select the program source with input – Sony SA-VA1 User Manual
Page 10: Play the program source
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Enjoying Surround Sound
Use the procedure described below to enjoy any of the following surround sound modes:
DOLBY mode:
In this mode, the built-in Dolby surround sound system produces superb
theater-like sound when playing movies or sound sources bearing the "mioiwiiii^si" or
"DOLBY STEREO" logo.
HALL mode:
Select this mode to obtain dynamic surround sound effect during sports programs
broadcast in stereo.
SIMULATED mode:
Select this mode to achieve simulated stereo sound from a monaural source
such as an old movie.
SUPERWOOFER
ON/OFF
Press POWER on the operation panel.
If there is no audio signal at the time you turn on
the power, the indicator on the POWER switch
lights up red and the speaker system enters
READY mode.
If there is an audio signal when you turn on the
power or an audio signal is input when the
speaker system is in READY mode, the indicator
on the POWER switch lights up green and the
speaker system begins operating immediately.
If the audio input stops, the display turns off
after about 30 seconds, and after another two and
a half minutes or so the indicator on the POWER
switch turns red and the speaker system returns
to READY mode.
Press the POWER switch again to return to
STANDBY mode.
O POWER
Operation panel
Select the program source with INPUT
(
1
/
2
).
The INPUT 1 or 2 indicator lights up.
INPUT 1
INPUT
INPUT 2
t>
Operation panel
Remote commander
Play the program source.
For details on the operation of connected
equipment, refer to the operation manual of the
respective equipment.
10