Sony SPP-D900 - Manual (Page 3)

step 2: Setting up the base unit (continued)
Connect the base unit
If you want to hang the base unit on the wall, mount the unit/irst (see
page 20). ,
Oi
Connect the AC power adaptor
to the DC IN 9V jack and to an
AC outlet.
Raise the antenna vertically.
C\
o
r+
5'
(Q
in
f+
t)
o
a
Notes
• Use only the supplied AC-T48 AC power uduptor.
Do not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power supply.
• Place the ba.se unit close to the AC outlet so that you can
unplug the AC power adaptor easily.
Polarity of the plug
Modular
Tips
□
• If your telephone outlet isn't modular, contact your
telephone service company for assistance.
• If you have two phone lines on a single jack with the first
phone line connected to center pair of wires, and need to
connect the second phone line (outer pair of wires),
contact your telephone company for rewiring.
Center pair
Choose the dialing mode
For the telephone to work properly, select an
appropriate dialing mode (tone or pulse).
Depending on your dialing system, set the DIAL MODE switch as
follows.
If your dialing system is Set the switch to
Tone T
Pulse P
continued
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to T.
If the call connects, leave the switch as it is; otherwise, set to P.
Getting Started 9^'“ 10^'^ I Getting Started