Нёсокйпца ptoturs ilskig auiomrtic, 1 hold the camcorder as illustrated, 2 make sure that the vtevriinder is pulled out – Sony CCD-TR7 User Manual

Page 12: 6 slide standby up, 7 press start/stop, To pause (to stop momentarily), To stop

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

The position of the viewfinder lens for optimum

vision varies depending on the person. Adjust

when using the first time, or when using after
someone else.

(F-1)

1

Make sure a power source is connected.

2

Pull the viewfinder out until it clicks.

3

While pressing the green button, set

POWER to CAMERA.

4

Insert a cassette.

5

Slide STANDBY up.

6

Turn the viewfinder lens adjustment ring so

that the “STBY" display in the viewflr>der
screen comes into sharp focus.

24

Нёсокйпца Ptoturs

ilskig Auiomrtic

Before recording "once-onty" events, we

strongly recommend making a trial recording
and checking that everything is working
properly

(F-2)

1

Hold the camcorder as illustrated.

Put your hand through the grip strap and

check that your thumb can easily touch
START/STOP.

2

Make sure that the vtevriinder Is pulled out.

3

Remove the tens cap and clip It on the grip

strap.

4

While pressing the green button, set the

POWER to CAMERA.

5

Close the AUTO LOCK cover and turn the

zoom lever downwards.

6

Slide STANDBY up.

"STBY" and the auto-focus frame appear in

the viewfinder. The camcorder is now in the
standby mode, and focus is adjusted
automatically irtside the frame (auto-focus
adjusting range). Do not turn or stop the
focus ring forcibly.

7

Press START/STOP.

"REC" appears and the red lamp lights up
in the viewfinder. The camcorder is now
recording.

To pause (to stop momentarily)

Press START/STOP again.
"STBY" appears in the viewfinder. The
camcorder is in the standby mode again.

To stop

Slide STANDBY down and set POWER to OFF.

25

Advertising