Showrs up durtng recording, In the macro range, Exchattge tape – Sony CCD-TR7 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
J fast blint'lng P ] slow blinking
Display In tha viawllndar seraan
and caution lamp
tSJ and Battery lamp
Cause
Correcllve action
The battery Is weak.
Prepare a charged one
cn and Battery lamp
The battery Is used up.
Use a charged battery
ffla and Battery lamp
The tape is near its end.
Prepare a new one.
DO, — and battery lamp
The tape ts at its end.
Use a new tape.
PH
No tape Is Inserted.
№ and —
The tab on the tape is out (red).
Slide the tab back or use a new
SI. ± and DEW lamp
Moisture condensation has
occurred.
Remove the (ape and do rro(
operate the camcorder for about 1
i and DEW lamp
Moisture condensed on the tape.
Remove the tape and do not
operate the camcorder lor about
1
Q and Caution lamp
The gap ot the head is clogged.
Clean the head using the Sony
V8 25CLH cleaning (ape.
A and Caution lamp
Other trouble may occur.
Turn off the camcorder and
remove the battery. Then attach
the battery again II the lamp still
blinks, consutl your nearest Sony
dealer.
AM 12 00 00 blinks (O'
6 seconds alipr selling
POWER to CAMERA
7he currenl lime blinks
lor 5 seconds alter
selling POWER to
CAMERA
Correcllve action
The lithium battery is
installed
The lithium battery is
exhausted
68
Inside the VietMfinder
(X-1)
Q BACK LIGHT is pressed.
fT) White balance mode
( i f c I
-■* - /HOLD)
[Tl Title mode
[
4] Shutter speed
[U FADER is pressed.
[§] “Replace battery.”
[~7] Moisture condensation.
fsl Auto focus adjusting range
Goes out during manual focusktg
Showrs up durtng recording.
When bllnicing: “Replace battery.”
In the MACRO range
fTT| Tape transport and camera recording mode
Tape counter
[
13} ZERO MEM is pressed.
“Exchattge tape."
[
1^ “Clean video heads." or other caution (Q, —)
[iel Date or time
69