Sony CCD-TR7 - Manual (Page 28)

You can creale your own video program by
editing with any other 0 8 mm, FD Betamax
or VMS VHS VCR.
♦ Make conr>ections using the supplied
audio/video connecting cable. (S-1)
• Set the input selector of the VCR to LINE, If
available.
1 Insert a tape to be recorded on Into the
recording VCR.
2 Move EDIT on the camcorder In the
direction of the amm. (EDIT ON)
3 Set INPUTfOUTPUT to OUTPUT.
4 Set POWER of the camcorder to VTR aiKf
insert your recorded tape.
5 Playback the tape on the camcorder and
locate the point where you want to start
editing and set the camcorder to the
playback pause mode.
6
On the recording VCR, locate the recording
start point and set the VCR to the recording
pause mode.
7 Press on b
start edith>g.
5
simultaneously to
To stop editing momentarffy
Press 'I on the recording VCR.
To edit more scenes
Repeat steps 5 to 7.
To stop editing
Press n on both units.
Use ot the EDIT switch
When you set EDIT to the direction of the
arrow (EDIT ON), picture deterioration resulting
from editing can be kept to the minimum. * •
56
Notes
• Avoid using the edileo (ape (or muKipfe
generations of editing.
♦ Ader edi(ing, move EDIT in the opposite direction
of the arrow (EDIT OFF).
You can record a tape from another VCR or a
TV program from the TV equipped with
audio/video outputs. (T-1)
• Disconnect the RFU adaptor from the
camcorder it it is connected.
• Make connections using the supplied
audio/video connecting cable.
• Read the instruction manual of the other
equipment to be connected.
If your VCR Of TV is a monaural type, connect
only the white plug tor audio both on the
camcorder and the VCR or TV. Do not use the
red plugs.
1 Turn on the TV or VCR.
2 Select the TV program or play beck the
tape to be recorded.
3 Set 1NPUT/OUTPUT to INPUT.
4 While pres^ng the green button, set the
POWER on the camcorder to VTR.
5 Irrsert a tape and slide # REC.
Recording starts.
You can monitor the picture being recorded
in the viewfinder screen.
57