Sony KV-32XBR100 - Manual (Page 40)

I
Displaying Caption
Vision/XDS
(CAPTION VISION)
Some programs are broadcast with Caption Vision. To
display Caption Vision, select either CCl, CC2, CCS,
CC4, TEXTl, TEXT2, TEXTS or TEXT4 from the menu.
CCl,
CCl, CCS or CC4 shows you a caption, that is a
printed version of the dialog or sound effects of a
program. (The mode should be set to CCl for most
programs.) TEXTl, TEXT2, TEXTS or TEXT4 shows you
text, that is information presented using either half or
the whole screen. It is not usually related to the
program.
Some programs are broadcast with XDS (Extended
Data Service) which shows a network name, program
name, program length, call letters and time of the
show. When you select XDS with the DISPLAY button,
this information will be displayed on the screen if the
broadcaster offers this service.
-MENU
-Joystick
2
Press the joystick up or down to select
and click the Joystick.
t
Use (J) RETURN0Exit
3
Press the joystick up or down to select the
caption type and click the joystick.
The selected caption type is colored green.
Use (f) RETURN0Exits
To turn off the caption, text or XDS
Press DISPLAY on the remote commander until
"DISPLAY OFF" appears on the screen. Each time you
press DISPLAY, the display changes as follows:
on-screen information —*■ XDS —► Caption Vision or Text
^--------- DISPLAY OFF ------------------------- *
"DISPLAY OFF" goes off after three seconds.
Notes
• Poor reception of TV programs can cause errors in Caption
Vision and XDS.
Captions may appear with a white box or other errors instead
of a certain word.
• Caption Vision and the channel display cannot be used at the
same time.
40
Operations