Releasing the steady shot function, To activate the steady shot function again, Notes on the steady shot function – Sony CCD-TR400 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Releasing the Steady Shot Function
When you shoot, the '0> indicator appears in the viewfinder. This indicates that the Steady Shot
function is working and the camcorder compensates for camera-shake.
You can release the Steady Shot function. Do not use the Steady Shot function such as when shooting
stationary object with a tripod.
Set STEADY SHOT to OFF.
To Activate the Steady Shot Function Again
Set STEADY SHOT to ON.
Notes on the Steady Shot function
• The Steady Shot function will not correct excessive camera-shake.
• When you switch the STEADY SHOT, the expxwure may vary.
I
c
a
s
A
3
iO
f
Í
y
s
Tt
c
3
a
0
25
Advertising