Watching the tv, Switching quickly between two channels, 1 press power to turn the tv on – Sony KV-27S10 User Manual
Page 13: 2 select the channel you want, 3 press vol +1- to adjust the volume, Press jump, Muting the sound, Press muting, Displaying on-screen information, Press display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operations
I
Watching the TV
Switching quickly between two
channels
MUTING
POWER
SLEEP
DISPLAY
0-9 buttons
ENTER
1
Press POWER to turn the TV on.
POWER
If "VIDEO" appears on the screen, press the TV/
VIDEO button so that a channel number appears.
2
Select the channel you want:
To select a channel directly
Press the 0-9 buttons and then press ENTER.
©
0
®
© © ©
^
© 0 0 (O
ENTER
©
O
The channel can also be selected without pressing
ENTER.
To scan through channels
Press CH +/- until the channel you want appears.
CH
vz/
b
3
Press VOL
+1-
to adjust the volume.
VOL
Db
vz/
Note
• Set the CABLE BOX/TV selector to TV.
(KV-27V10/29VUC/29V10M only)
Press JUMP.
The channel you watched previously appears.
JUMP
Pressing JUMP again switches back the channel.
Muting the sound
Press MUTING.
"MUTING" appears on the screen.
MUTING
15
To restore the sound, press MUTING again, or press
VOL -H.
Displaying on-screen information
Use this feature to check the channel number, channel
caption (if set), and MTS mode (if SAP is selected).
Press DISPLAY.
DISPLAY
To cancel the display, press DISPLAY again.
Setting the Sleep Timer
The TV stays on for the length of time you specify and
then shuts off automatically.
Press SLEEP repeatedly until the time (minutes)
you want appears.
Each time you press SLEEP, the time changes as
follows: 30
-0
60 -► 90 -► OFF.
SLEEP
To cancel the Sleep Timer, press SLEEP repeatedly
until "SLEEP OFF" appears, or turn the TV off.
Operations ^ 3