Sony KV-27S10 - Manual (Page 21)

Displaying Caption
Vision
(CAPTION VISION)
Operating video
equipment
■
KV-27S10I27V10132S10132S12 only
Some source programs are provided with Caption
Vision (Closed Caption). To display Caption Vision,
select either CCl, CC2, TEXTl, or TEXT2 from the
menu.
CCl or CC2 shows you a caption, that is a printed
version of the dialog or sound effects of a program.
(The mode should be set to CCl for most programs.)
TEXTl or TEXT2 shows you text, that is information
presented using half to full of the screen. It is not
usually related to the program.
A+ or V—
CD
CD
CD
CD (Tj
V
0
mgn
'MENU
- RETURN
1
Press MENU.
2
Press A+ or V- to select CAPTION VISION and
press RETURN.
RETURN
CAPTION V I S I O N
►m/TEXT OFF
ES11
ICEI?
TEXTl
TEXT2
3MFNI1
Usg » fBa E x i l I
3
Press A+ or V- to select the caption type
and press RETURN.
RETURN
«
CAPTION V I S I O N
m/TEXT OFF
►iBai
ESK
TEXTl
TEXT2
:XVENU
Use $ IraB Exi t S
Note
• Captions may appear with a white box or another error instead
of a certain word. Poor reception of TV programs can also
cause errors in Caption Vision.
■ KV-27V10l29V1ia29V10M only
You can operate Sony or non-Sony video equipment
that has an infrared remote sensor with the supplied
remote commander. For this operation, set the
manufactiurer's code number.
Setting the manufacturer's code
0-9 buttons
ENTER
While pressing CODE SET, press 0 - 9 to enter
the manufacturer's code number (see the chart
on the next page). For example, to operate a
Sony 8 mm VCR, press 0, 2 and ENTER.
CODE SET
+
Operations 21