Notes, Tips, Modular – Sony SPP-M920 User Manual
Page 11: Center pair, Choose the dialing mode, Dial mode switch, If you aren't sure of your dialing system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Notes
• Use only the supplied AC-T58 AC power adaptor. Do
not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the base phone close to the AC outlet so that
you can unplug the AC power adaptor easily.
Polarity of the plug
Tips
If your telephone outlet isn't modular, contact your
telephone service company for assistance.
If you have two phone lines on a single jack with the
first phone line connected to the center pair of wires,
and need to connect the second phone line (outer pair
of wires), contact your telephone company for
rewiring.
Modular
□
Center pair
O
A
5'
(Q
W)
r*
SI
<s
a
Choose the dialing mode
For the telephone to v\'ork properly, select the appropriate dialing
mode (tone or pulse).
DIAL MODE switch
If you aren't sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
Getting Started 1 1 1 '