CDA SC309 - Manual (Page 3)

Electrical supply to your oven
IMPORTANT: Installation must be carried out according to the manufacturer's
instructions. Incorrect installation may cause harm and damage to people, ani-
mals or property, for which the manufacturer accepts no responsibility.
Before carrying out any work on the electrical section of the appliance, it must
be disconnected from the mains.
Connection to a good earth wiring system is absolutely essential.
The manufacturer accepts no responsibility for any inconvenience caused by
failure to comply with this rule.
DETAILS
✓
Connection to the electric power supply must be carried out by a qualified
technician and following the appropriate safety regulations.
✓
Before carrying out the connection to the power supply, the voltage rating of the
appliance (stamped on the appliance identification plate) must be checked for
correspondence to the available mains supply voltage, and the mains electric wiring
should be capable of handling the appliance’s power rating (also indicated on the
identification plate).
Figure 1
Green & Yellow
Earth
3 amp fuse
Blue Neutral Brown Live
3