Camera recording, Adjusting the lcd panel angle, Note – Sony CCD-CR1 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Camera recording
Beforo vtni rca^rd one-timc events, you mny want to make a trial recording to make
sure that the cama>rder Is working correctly.
(1) Make sure that the power source is installed, (p. 8, 10)
(
2
)
While pressing the small button on the POWER switch, slide it in the direction
of the arrow. I'he small button lights up green.
(3) Press START/STOP. The camcorder records for about 5 seconds and stops.
The tape a>unter disappears and five dots appear. The dots disappear at a rate
iT one per second. The red lamps light up.
To extend the recording time in 55EC mode, press START/STOP again before
all the dots disappear. Recording cemtinues for about 5 seconds from the
m<iment you press START/STOIh
rari POWER
B-- llJ ON.'OFF,.*
@1
. A .«rW.r.
i5So 00 01
Adjusting the LCD panel angle
Adjust the LCD panel to the angle ytm want.
Note
To save battery ptnver and prevent the battery and tape from wearing down, the power
turns off automatically if you do not operate the camcorder for S minutes while the
video cartridge is inserted and the power is on. To start recording, turn the power on
again and press SI AR'I /STOIV
12
"