Photo recording, Adjusting the lcd panel angle, To prevent camera-shake – Sony CCD-CR1 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Photo recording
You can record a still picture like a photograph for about five seconds. Photo recording
is useful when vou want to enjoy a picture such as a photograph or when you print a
picture using a video printer.
(1) Make sure that the power source is installed, (p. 8, 10)
(
2
)
While pressing Ihe small button on the POWER switch, slide it in the direction
of the .arrow. The small button lights up green.
(3) Keep pressing PHOTO lightly until a still picture and "O CAPTURE" appear
on the LCD screen. To change the still picture, release PHOTO, select still
picture again, and keep pressing PHOTO lightly again.
(4) P ress PHOTO deeper. The still picture on the LCD screen is recorded for
about five seconds. The tape counter disappears and five dots appear. The
dots disappear at a rate iT one per second. The red lamps light up. The sound
during those fiv e seconds is also recorded.
Adjusting the LCD panel angle
Adjub-l the LCD panel to thi* angle vou want.
To prevent camera-shake
When shooting a still picture, the slightest movement of the camcorder is noticeable. To
prevent camera-shake, hold the camcorder firmly or use a tripod.
140