Sony CDP-CX350 - Manual (Page 10)

Getting Started
What cords will I need?
• Audio cord ( 1 ) (L'so tlu' coi'd supplied wUli the pl<i\-er to be
eonneeted.)
• Monuural 1^21’) mini-plug cord (1) (m>t supplied)
1
Connect the players with an audio cord (see also
"Hookups” on page 3).
CDP-CX350/
CX555ES
CDP-CX230, etc.
2ND CD LINE
......'
R 0
LINE OUT
2
Connect the players with a monaural (2P) mini­
plug cord.
CDP-CX350/
CX555ÉS
CDP-CX230, etc.
For details on this connection, refer to the
supplementary "CONTROL A1 U Control System"
instructions.
Set the COMMAND MODE selector of this player
to CD 1 or CD 2, and set the command mode of the
second player to CD 3.
COMMAND MODE
Ё5
For details on how to operate the second player,
see "Controlling Another CD Player" on page 27
and "Playing Alternately" on page 29.
A
Connect the AC power cord of both players to AC
outlets.
Notes
• Do not connect a player other than that you intend to use as
the second player to the 2ND CD IN jacks of this player.
• When connecting a second CD plaver, do not connect the
DIGITAL OUT (OPTICAL) connector of this unit to the
amplifier.
• If vou connect another CD pla\'er after you have already set
up the remote, follow "Setting Up the Remote" on page 6 to
set up the remote again.
• To operate the second CD plaver with the remote, press
PLAYHR SFLECT on the remote to select the second plaver.
inserting CDs
You can insert up to 300 discs into this plaver.
I/C!) OPEN/CLOSE JOG
1 Press l/Cl) to turn on the player.
2
Open the front cover by pressing OPEN / CLOSE.
3
Turn the JOG dial until you find the disc slot
where you want to insert a disc, while checking the
disc number (written beside every slot and also
indicated in the display).
Disc number
10