Sony CDP-CX350 - Manual (Page 24)

Playing CDs
Creating a program using the remote
ENTER
CLEAR
1
I’ross I’RCXiKAM until the program number vou
\sanl (PKC^CiKAM I, 2, or 3) appears in the displa\’,
2
Press DISC.
PROGRAMS
C01
2 0
D I 5 C - [
- / 3
3
Press the number button of the disc.
PROGRAM1
C01
2 0
D I S C - [ 2 0 ]
4 To program a whole disc, press ENTER and go to
Step 6.
PROGRAM1
CDi
20
UI^L. IKACK 2 0 — T
5
First press >10 then press the number button of the
track.
When the disc has less than 10 tracks, press 10/0
first then press the corresponding number to enter
a track number from 1 to 9.
The disc being programmed
2 0
2 0
STEP
A
The track being programmed Playing order
6
To program other discs/tracks, do the following:
To program Repeat Steps
All tracks of another disc(s) 2 to 4
Other tracks on the same disc 5
Other tracks on other discs 2 to 5
7
Press ENTER or to start Program Play.
To cancel Program Play
Press CONTINUE,
You can check or change the program by pressing the
CHECK or CLEAR button on the remote |
See page 23.
24