Connecting s-link to your vcr, Connecting s-link to your dbs, Note – Sony KV-36XBR200 User Manual
Page 16: Connecting and instaiir
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/630430/16/background.png)
Connecting S-Link to your VCR
S-Link will automatically power on the TV and
switch to the correct video input when a tape is
inserted in the VCR or when you begin to play
a tape.
1
Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.
2
Using an S-LINK connector (mono mini
plug), connect S-LINK/CONTROL S-IN on
your VCR to S-LINK on your TV.
Connecting and Instaiir
Disconnect all power sources before making any connectioi
Connecting S-Link to your DBS
S-Link will automatically power on the TV and
switch to the correct video input when you
power on the DBS.
1
Using A/V connectors, connect AUDIO and
VIDEO OUT on your DBS to AUDIO and
VIDEO IN on your TV.
2
Using an S-LINK connector (mono mini
plug), connect S-LINK/CONTROL S-IN on
your DBS to S-LINK on your TV.
Note
• If you have labeled one of your video inputs
as SKIP (see "VIDEO LABEL" on page 27)
and then connect video equipment to this
input using S-Link, the S-Link feature will
override the SKIP function.
12
The S-Link connector must be in the same
VIDEO-IN jacks as the A/V cables on your TV.
DBS
(Rear of TV)