Sony KV-36XBR200 - Manual (Page 36)

Operating Vicleo
MDP code numbers
Manufacturer Code
Sony 701
Panasonic 704,710
Pioneer 702
DVD Player code numbers
Manufacturer Code
Sony 751
Panasonic 753
Pioneer 752
RCA 755
Toshiba 754
T i p s V
• In some rare cases, you пшу not be able to operate your
non-Sony video equipment with the supplied remote
control. In this case, please use the equipment's own
remote control.
• When you remove the batteries, the code number may
revert to the factory setting.
To operate video equipment
1 Set the VTR1/2/3/DVD/MDP switch to
the position through which you would
like to access the video equipment.
2 Use the VCR/DVD/MDP buttons
indicated in the following tables.
32
р п н ч а п ч е
r .
Operating a VCR using the remote control
To turn On/Off Press VTR/DVD (POWER).
[Green Button]
To select a channel Press the 0 - 9 buttons.
To change channels Press CH +/-.
To record Press (33 (REC) while
pressing CD (upper left).
jfTo play Press ► .
To stop Press ■ .
To fast forward Press
To rewind the tape Press
To pause Press
II.
Press again to
resume normal playback.
.To scan the picture Press ► ► or ◄ ◄ during
playback. Release to resume
normal playback.
To change input
mode
Press TVA/TR.
Operating an MDP using the remote control
To turn On/Off Press VTR/DVD (POWER).
[Green Button]
To play Press ► .
To stop Press ■ .
To pause Press
II.
Press again to
resume normal playback.
To scan the picture Press ► ► or during
playback. Release to resum
normal playback.
To search a chapter
forward or backward
Press CH +/-.
Operating a DVD Player using the remote
control
To turn On/Off Press VTR/DVD (POWER).
[Green Button]
To play Press ► .
To stop Press ■ .
To pause Press
II.
Press again to
resume normal playback.
To step through
different tracks of
Press ► ► to step forward or
◄ ◄ to step backward.
an audio disc
To step through
different chapters of
a video disc
Press CH+ to step forward or
CH- to step backward.
To display the Title Press TITLE.
menu
To display the DVD
software menu
Press DVD MENU.
To select tracks
directly
Press 0-9 buttons and ENTER
To display the menu
(Set up)
Press MENU.
To move the cursor Move the joystick in the
in the menu corresponding direction.