Sony KV-36XBR200 - Manual (Page 38)

Troubleshooting
To
reset the
TV
to
factory
settings
No picture (screen not lit), no
sound
Remote control does not operate
Dark, poor or no picture (screen
lit), good sound
Good picture, no sound
First, turn the TV on. Then, while pressing the RESET button on the remote control, press the POWER button on the TV. The TV will
turn itself off, then back on. When the TV turns on again, all settings will be reset, and the Easy Setup Guide will appear.
If your TV does not turn on, and a red light keeps flashing, your TV may need service. Call your local Sony service center.
Make sure the power cord is plugged in.
Operate with the buttons on the TV and the remote control.
Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV, and when watching video tapes, set to VIDEO 1 , 2 , 3 or *
Try another channel. It could be station trouble.
Perform Easy Setup Guide again using the SET UP button to return to the factory preset condition, (see “To perform AUTO SET UP
again” on page 14)^
Batteries could be weak. Replace the batteries.
Press TV (FUNCTION) when operating your TV.
Make sure the TV’s power cord is connected securely to the wall outlet.
Locate the TV at least 3-4 feet away from fluorescent lights.
Check the S-Link connection, (see page 12)
Make sure the batteries are inserted correctly.
____________
Adjust PICTURE lathe VIDEO menu, (see “PICTURE” on page 23)
Adjust BRIGHTNESS in the VIDEO menu, (see “BRIGHTNESS” on page 23)
Check antennaycable connections.
Perform Easy Setup Guide again using the SET UP button to return to the factory preset condition, (see “To perform AUTO SET UP
again” on page 14)
When VIDEO LABEL is set to WEB, the screen will darken, creating an ideal picture for WebTV viewing, (see "VIDEO LABEL" on page 2
Press MUTING so that “MUTING” disappears from the screen, (see “MUTING” on page 16)
Check the MTS setting in the AUDIO menu, (see “MTS” on page 24)
Make sure SPEAKER is set to ON in the AUDIO menu, (see “SPEAKER” on page 24)
Perform Easy Setup Guide again using the SET UP button to return to the factory preset condition, (see “To perform AUTO SET UP
again” on page 14)
Cannot receive upper channels
(UHF) when using an antenna
No color
Make sure CABLE is OFF in the SET UP menu, (see “CHANNEL SET UP” on page 26)
Use AUTO PROGRAM to add receivable channels that are not presently in TV memory, (see “CHANNEL SET UP” on page 26)
Adjust the COLOR in the VIDEO menu, (see “COLOR” on page 23)
Perform Easy Setup Guide again using the SET UP button to return to the factory preset condition, (see “To perform AUTO SET UP
again” on page 14) _____ _________________ _____
34