Creating your own program (program play), Creating a program on the player, To cancel program play – Sony CDP-CX53 User Manual

Page 13: Note, Sd 1 t, Playing cds

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Playing CDs

Creating Your Own Program
(Program Play)

You can arrange the order of the tracks and/or^^iscs to
create your own program and the program is stored
automatically. A program can contain up to 32 "steps"
— one "step" may contain a track or a whole disc.
You can make a program using the controls on the

remote as well as ones on the player. However, the
programming procedures are different.

Creating a program on the player

PLAY MODE

CHECK JOG

O IKM/OCXl CLEAR

1

Press PLAY MODE repeatedly until "PROGRAM"
appears in the display.

If a program is already stored, the last step of the
program appears in the display. When you want to
erase the whole program, hold down CLEAR until
"Clear" appears in the display (see page 14).

2

Turn the JOG dial until the disc number you want
appears in the display.

Disc number

3

To program a whole disc, skip this step. Press

IW</C>M until the track number you want
appears in the display.

SD 1

T-

-I.

4

Push the JOG dial.

The track being programmed

DISC

TRAJC

'fi

PROGRAM

4-

The disc being

Playing order

programmed

5

To program other discs/tracks, do the following:

To program

Repeat Steps

All tracks of another disc(s)

2 and 4

Other tracks on the same disc

3 and 4

Other tracks on other discs

2 to 4

6

Push the JOG dial or press [> to start Program
Play.

To cancel Program Play
Press PLAY MODE.

'Q'

The program remains even after Program Play ends

when you push the JOG dial or press O, you can play
the same program again.

'Q' When you press PLAY MODE to select Program Play

during Continuous or Shuffle Play
The program will be played after the current track.

«1#

'Q'

The program remains until you erase them

Even if you replace discs, the programmed disc and track
numbers remain. So, the player plays only the existing
disc and track numbers. However, the disc and track
numbers that are not found in the player or on the disc
are deleted from the program, and the rest of the
program is played in the programmed order.

Note
If you press one of the BLOCK 1-5 buttons (see page 16) or

the PLUS ONE button (see page 15) during Program Play,
Program Play will be canceled.

Track number

13

Advertising