Sony CDP-CX53 - Manual (Page 7)

Getting Started
The disc number at the loading position appears in
the display.* As you turn the JOG dial, the disc
number changes.
6 Close the front cover by pushing PUSH OPEN of
the cover until it clicks.
ALL DISCS
d ISC - Efl.
Disc number
You can play the disc you want independently by
using the Plus One function. When using this
function, insert the disc into the PLUS ONE slot.
For details, see "Pfaying Your Favorite Disc
Independently" on page 15.
You can arrange your discs into groups and play
them within a certain group using the Block Play
function. When using this function, you have to
insert discs into the slots assigned to one of the five
blocks. For details, see "Playing Discs in a Group"
on page 16.
* If you have already inserted discs, the disc number at
the playing position appears.
4
Insert a disc with the label side facing right.
Notes------------------------------------------------------------------
Make sure you have inserted the disc into each slot at
a right angle to the rotary table. If the disc is not put
in straight, it may damag&the player or the disc.
Make sure the rotary table comes to a complete stop
before inserting or removing discs.
With the label
side facing right
5
Repeat Steps 3 and 4 to insert more discs.
The rotary table turns and the disc slot at the
loading position is set to the playing position.
Always close the front cover except when you
insert or remove discs.
The supplied CD booklet holder helps you locate a
disc
You can store up to 50 CD booklets.
Notes
• Do not insert an empty 8 cm (3-inch) CD adaptor (CSA-8). It
may damage the player.
• Do not attach anything such as seals or sleeves to CDs. It may
damage the player or the disc.
• If you drop a disc into the player and the CD won't go into
the slot correctly, consult your nearest Sony dealer.
• When transporting the player, remove all discs from the
player.
Removing CDs
After following Steps 1 to 3 of "Inserting CDs" on
pages 6 - 7 , remove the discs. Then close the front
cover.
Note
The disc being played does not come to the loading position if
you open the front cover. (The disc number flashes in the
display.)
If you want to remove the disc being played, push the JOG
dial after opening the front cover. The disc comes to the
loading position. Remove the disc after the rotan- table comes
to a complete stop.