To check the time remaining of the tape – Sony CCD-FX410 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■illiil»
To check the time remaining of the tape
Press TAPE/BATT CHECK.
S [ -
] E -
-►S[
■►S[
Omin
\ I /
-Omin -
/ I N
-5min
4min -
Tape length indicator
After pressing TAPE/BATT CHECK, the time remaining may not be indicated for about 20
seconds. When the time remaining is less than about 5 minutes, the indicator indicates the
minutes remaining.
Wlien "5 min” lights, the indicator appears in the viewfinder and blinks.
Note on the tape length indicator
• The camcorder must be in the recording or playback mode when the TAPE/BATT CHECK is
pressed to find out the time remaining. In the playback mode, however, the indicator does not
indicate the minutes remaining.
• The tape length indicator does not change while using EDITSEARCH.
fs;/:
■ ■ f.;A
i
ffl
Basic Camera Operation “| Q