Making manual adjustments, How to focus manually, 1 set focus to manual – Sony CCD-FX410 User Manual
Page 38: Turn the focus ring to achieve sharp focus, Shooting with autofocusing momentarily, Shooting in relatively dark places
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
'V -. ' r‘'\* .->i' ~ • . - ■ ■ ■ ? ■ -;.#■■ 1 ■ .
, —
■
i u
ili
Making Manual Adjustments
How to focus manually
When adjusting focus manually, the best way is to first adjust at telephoto position before
recording, then set the desired zoom angle.
Let’s go through step by step.
1
Set FOCUS to MANUAL.
The cB- indicator appears in the viewfinder.
FOCUS
f-AUTO
2
Keep pressing the T side (telehpoto) of the
power zoom button until the zooming stops.
The power zoom indicator appears in the viewfinder.
Turn the focus ring to achieve sharp focus.
Note
The focus ring does not have a stop position.
Set the desired shot length using the power
zoom button.
W
2,4
a
Shooting with autofocusing momentarily
While shooting with manual focusing, push FOCUS down to PUSFI AUTO.
The autofocusing functions while you are pressing the button. When you release the
button, manual focusing will be resumed. Use this button when you change the focus from
one subject to another. The focusing performs naturally.
The previous settings except for focusing are retained.
Shooting in relatively dark places
When shooting in relatively dark places such as indoors, the depth of field in proper focus
is very shallow. For best results, shoot at wide angles after focusing in telephoto.
38
Advanced Camera Operation