Press zero mem, Press ii of both units to start insert editing, To change the end point – Sony CCD-FX410 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
r*/
a-
Hi
4
Locate the start point where the insert should
begin by pressing
5
At the start point, set the camcorder
into recording pause mode.
PAUSE
Press ZERO MEM.
The end point of the insert is stored
in memory.
Press II of both units to start insert editing.
You can monitor the picture being inserted in the
viewfinder screen.
REWS
• REC-
/
•
I t )
-ZER O M EM
/ 1 ^
.
PAUSE
The insert recording will stop automatically near the zero point on the counter.
To change the end point
Press ZERO MEM so that the ZERO MEM indicator disappears, and operate again from
step 2.
56
Advanced Camera Operation
Advertising