Sony STR-DE905G - Manual (Page 20)

Preparing and Using the Remote
3 Click the appropriate function.
IR CODE SETTING
VIDEO 1 Sony VTR3
VIDEO 2 Sony VTR1
VIDEO 3 Sony VTR2
LD Sony LD
TV/D8S Sony DBS
DAT/MO Sony DAT
CD Sony CD1
TAPE Sony TAPE
I tJ RETU^~| I» EXIT
4 Click "Sony” for a Sony product or OTHER for a
non-Sonv product.
IRCODE SETTING
I
MAKER
OUTPUT
Sony i I OTHER 1
I tj RETURN~|
If the program source is a Sony product
The IR codes are programed automatically and
registration is complete (click RETURN or EXIT).
To take ad\ antage ot CO.NTROL-Al compatible audio
components, such as multi-disc CD players, click
COXTROE-Al to select CONTROL-Al.
5 Click the respective program source.
IR CODE SETTING
MAKER Sony I OTHER
OUTPUT IR
VCR
I TV TAPE
LD DAT
CD MD
I tj RETURN I
If the equipment is not a video deck or laser disc
player
Cover the IR sensor on the equipment to prevent
accidental operation during the programing procedure,
click START, then go to step tv
IR CODE SETTING
MAKER
OUTPUT
Sony
VCR
I TV TAPE
LD DAT
CD MD
I tJ RET|7 r N~1 1 START I !:♦ EXIT
If the equipment is a video deck or laser disc player:
1 Click START.
A list of other manufacturers appears.
2 Click the manufacturer of the respective equipment
and the IR codes for that program source are
registered automaticallv. (if tiie manufacturer is not
listed, cover the IR sensor on the equipment to
prevent accidental operation during the programing
procedure, click "OTHER”, then go to step 6).
3 Click TEST.
If the selected program source turns on, it means the
IR codes have betm registered. This ends the
procedure.
If the program source does not j.urn on. click the
number button beside the nianufacturer's name to
select another number, then click TEST again. If the
program source still does not turn on, cover the IR
sensor on the equipment to prevent accidental
operation during the programing procedure, click
"OTHER", click "OTHER", then go to step 6.
When "PUSH YOUR COMMANDER” appears on
the TV screen, press the button on vour audio/
video ec|uipment's remote that corresponds to the
control button highlighted the TV screen.
Q IS the POWER switch.
When programing the IR code, point the remote
at the IR sensor on tlie recei\-er from a distance no
greater than 4 inches (10 cm) and hold down the
20