Starting editing, To edit more scenes, To stop editing – Sony CCD-TRV41 User Manual
Page 59: Note on fine synchro edit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
starting editing
Turn down the volume of the camcorder while editing. Otherwise, picture distortion
may occur.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and inse;
your recorded tape into the camcorder.
(
2
)
Rlay back the recorded tape on the camcorder until you locate the point wheri
you want to start editing, then press II to set the camcorder in playback pausi
mode.
(3) On the VCR, locate the recording start point and set the VCR in recording
pause mode.
(4) Press II on the camcorder and VCR simultaneously to start editing.
To edit more scenes
Repeat steps 2 to 4.
To stop editing
Press □ on both the camcorder and the VCR.
Note on Fine Synchro Edit
If you connect a video deck that has the Fine Synchro F.dit feature to the LANC C jack
of the camcorder, using a LANC cable (not supplied), the edit will be even more
precise.