Trouble check, Symptom, Cause and/or corrective action – Sony CCD-TRV41 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Trouble check
Symptom
Cause and/or Corrective Action
(il and ^ indicators flash and no
function except for cassette ejection
works.
Moisture condensation has occurred.
4 Remove the cassette and leave the camcorder for at least 1
hour. (p. 67)
The date or time indicator is
flashing.
You pressed DATE and TIME together for more than 2
seconds.
The camcorder is not malfunctioning. You may start
recording. Flashing will stop soon.
The lithium battery is weak or dead.
Replace the lithium battery with a new one. (p. 61)
The tape does not move when a
video control button is pressed.
The POWER switch is set to C AMERA or OFF.
Set it to VTR.
The tape has run out.
Rewind the tape or use a new one. (p. 17)
The Steady Shot function does not
activate.
STEADY SHOT is set to OFF.
Set STEADY SHOT to ON. (p. 37)
The Steady Shot function does not work when the wide mode
is set to, 16:9 FULL.
The autofocusing function does not
work.
• FOCUS is set to MANUAL.
Set it to AUTO. (p. 32)
• Shooiing conditions are not suitable for autofocus.
4 Set FOCUS to MANUAL to focus manually, {p. 32)
The fader function does not work.
The START/STOP MODE switch is set to 5SEC or
-> Set it to A ( p . 44)
A title is displayed.
4 Stop superimposing the title, {p. 38)
No sound or only a low sound is
heard when playing back a tape.
The stereo tape is played back with HiFi SOUND set to 1 or 2
in the menu system.
■> Set to STEREO in the menu system, (p. 26)
Excessive high-pitched sound is
heard.
The picture has been recorded with WIND set to ON in the
menu system.
When there is no wind, set it to OFF. (p. 25)
Data code becomes
(CCD-
TRV81 only)
You are playing back a portion of tape on which you wrote or
erased the index signal. This is not a malfunction, (p. 50)
The date or time indicator
disappears.
Reset the date and time. (p. 62)
Picture
Symptom
Cause and/or Corrective Action
The image on the viewfinder screen
is not clear.
• The viewfinder lens is not adjusted.
Adjust the viewfinder lens. (p. 11)
A vertical band appears when a
subject such as lights or a candle
flame is shot against a dark
background.
• The contrast between the subject and background is too high.
The camcorder is not malfunctioning.
Change locations.
72