Sony INT-W200 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Your System
1
Connect the coaxial cable from your TV antenna or cable TV to the
VHF/UHF IN jack on the Internet Terminal.
2
Connect the supplied coaxial cable to the VHF/UHF OUT jack on
your Internet Terminal and to the VHF/UHF IN jack on your TV.
3
Connect the AUDIO LINE OUT jacks on the Internet Terminal to your
TV's AUDIO IN jacks, using the supplied A/V cable.
Do not connect the yellow conneddfs on the A/V cable to anything. -
4
Use the supplied S-VIDEO cable to connect the S-VIDEO jacks from
your Internal Terminal to your TV.
5
Connect one end of the telephone line cable to the Internet Terminal's
TEL LINE jack. Connect the other end to your telephone outlet.
6
Connect one end of the AC power cord to the Internet Terminal's AC
IN jack. Connect the plug end to an AC outlet.
^ If you choose this setup, press the TV/VIDEO button to cycle through the TV's video inputs
until the WebTV input appears on your screen.