Sony INT-W200 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
^f^fBf)om*«naxamiM»-ft(msaisg№asuSiSi9S^
Connecting Your System
1
Connect the coaxial cable from your TV antenna or cable TV to the
VHF/UHF IN jack on the Internet Terminal.
2
Connect the white connectors of the supplied A/V cable to the L
(mono) AUDIO OUT jack on the Internet Terminal and to the AUDIO
IN jack on your TV. Connect the yellow connectors from the VIDEO
OUT jack on the Internet Terminal to the VIDEO IN jack on your TV.
3
Connect the supplied coaxial cable from the Internet Terminal's
VHF/UHF OUT jack to the TV's VHF/UHF IN jack.
4
Connect one end of the telephone line cable to the Internet Terminal's
TEL LINE jack. Connect the other end to your telephone outlet.
5
Connect one end of the AC power cord to the Internet Terminal's AC
IN jack. Connect the other end to an AC outlet.
If you choose this setup, press the TVA/IDEO button to cycle through the TV's video inputs
until the WebTV input appears on your screen.
13